237770 Burkert United States Sales
If you are looking for a reliable supplier where you can purchase the 237770 2/2-way solenoid valve, force-controlled, you are in the right place. ONRION sells all product groups belonging to the Burkert brand in the United States market, with fast delivery times and competitive prices.
Request a price
Delivery time:
Determined at the time of quotation
VISA
Mastercard
Bank Transfer
Technical Specification
GENERAL INFORMATION
---------------------
2/2-way solenoid valve, force-controlled
Article number: 237770
Weight: 0.377 kg
Statistical product number: 84818079
MODE OF ACTION
-------------
Fluidic line connection number: 2
Valve function Number of switching positions: 2
Valve function: A - closed in rest position - pressure port 1 (P/NC)
Manual operation: No
PROCESS/LINE CONNECTION
----------------------------
Line connection 1 type: internal thread
Line connection 1 Thread name: 1/2
Line connection 1 Thread type: G
Line connection 2 type: internal thread
Line connection 2 Thread type: G
Line connection 2 Thread name: 1/2
TENSION
--------
Voltage min/Nominal voltage: 230 V
Max. voltage/Nominal voltage: 230 V
Voltage frequency: 50 Hz
Positive voltage tolerance: 10%
Negative voltage tolerance: 10%
AC voltage: Yes
DC voltage: No
Battery Voltage: No
MATERIALS
----------
Valve seat material: stainless steel
Main valve material in contact with the medium: brass
Control of material in contact with medium: PA (polyamide)
PRESSURE & TEMPERATURE
------------------
Backpressure-proof version: No
Nominal pressure min: 0 bar
Max. nominal pressure (liquid): 10 bar
Nominal pressure (DIN EN 1333): PN 10
Minimum medium temperature: -10°C
Max. medium temperature: 80°C
Ambient temperature min: -10 °C
Ambient temperature max: 55°C
SEALING MATERIAL
-----------------
Seat Seal Material Category: Elastomers
Seat seal material: NBR (nitrile rubber)
Outer sealing Material: NBR (nitrile rubber)
Seal pilot material: NBR (nitrile rubber)
APPROVALS
-----------
Rated power: 8 W
NOMINAL SIZE (KV VALUE)
-------------------
Kv value (water): 1.9 m3/h
Pre-control nominal size (mm): 1.2 mm
Main valve size 1 (P) (mm): 10 mm
Main valve size 1 (inch): 3/8 inch
DEVICE PROPERTIES
-------------------
Type: 6213
Drive type: lift anchor
Operation: servo-controlled
Media separation: No
Air flow: via seat
Main valve operating principle: diaphragm valve
Valve construction: valve complete
Switch function: on/off
Open switching time min: 10 ms
Open switching time max.: 30 ms
Close switching time min: 100 ms
Close switching time max.: 150 ms
Nominal operating mode/duty cycle: 100%
Vacuum version: No
Analysis version: No
Valve setting opening time: No
Valve setting closing time: No
Oil burner valve: No
Steam version: No
Central-bolted pilot control: Yes
Core guide: slide ring
Installation length: 50 mm
Main valve with integrated strainer: No
ELECTRICAL CONNECTION
----------------------
Electrical connection type: connector diagram form A according to DIN EN 175301-803
Electrical connection Number of contacts: 2 + protective conductor
Device outlet included: not included
Electrical connection position: left in flow direction
DEGREE OF PROTECTION
---------
Protection class (IP max. with suitable connection): IP65
COIL (CORE)
------------
Low-noise version: No
Spool type: plugged in
Spool material (jacket): PA (polyamide)
Spool size: 32mm
coil circuit surge protection: none
Coil circuit rectifier: No
Coil circuit pole protection: No
Freewheeling diode coil circuit: No
Drive thermal insulation class: B
Switch-on capacity AC: 24 V·A
Rated power AC: 8 V·A
Part in contact with the medium Core Material: stainless steel
Part in contact with the medium Plug Material: stainless steel