2591470 / DC 50W Condair United States Sales
If you are looking for a reliable supplier where you can purchase the 2591470 / DC 50W dehumidifier, you are in the right place. ONRION sells all product groups belonging to the Condair brand in the United States market, with fast delivery times and competitive prices.
Technical Specification
500 m3/h wall-mounted condensation dehumidifier in ready-to-connect design.
Durable hot-dip galvanized housing with RAL 9010 (pure white) powder coating.
Circulating dehumidifier for effective, fast and energy-efficient dehumidification, including more efficient
Hot gas defrosting for economic operation even at low room temperatures, comprises:
- Attractive design
- Microprocessor control with LED display
- Energy-efficient AC centrifugal fan
- hot-dip galvanized and RAL 9010 coated housing
- Demand-controlled hot gas defrosting
- Service-friendly construction
- Microprocessor control with LED display
- R410A refrigerant circuit
Maintenance-friendly design through simple disassembly of the housing panels. screws and rivets
are made of stainless steel. PVC dish drainer All connections welded in the refrigeration circuit are
executed in accordance with ISA 97/23. Built-in components come exclusively from established
brand manufacturers. The rotary compressor with crankcase heating and Klixon engine protection is
Vibration-damped installed. The refrigerant circuit is factory-filled with refrigerant R410A and
Pressure tested. The pressure is equalized via a capillary tube. Evaporators and condensers consist of
3/8# quality copper tubes with 0.15 mm aluminum fins. Optimized heat transfer through to
Copper pipes pressed into aluminum fins. Optimized condenser surface geometry for
low air-side resistance. To protect against chlorine, heat exchangers are equipped with a
coated. Directly controlled, sound-decoupled AC centrifugal fan with 40 Pa
external pressing. The fan housing is soundproofed and completely separated from the refrigeration circuit. IP54
Motor protection class. In the intake area, there is an easily removable filter class G2 air filter
(EN 779.2012) used. The dehumidifier is controlled by a fully electronic
microprocessor. This regulates functions such as demand-based hot gas defrosting, alarms and
compressor operation. Operating and fault messages are displayed on an integrated LED display.
The microprocessor enables integration into building management systems via a serial
RS485 interface with MODBUS protocol (option). Available contacts: Remote on/off, External
Hygrostat (is omitted when electric is installed. humidity sensor), central fault message.
Technical data industrial dehumidifier wall cabinet DC 50W:
Nominal air circulation: 500 m3/h
Drying capacity at 30°C, 80% RH: 49 l/24h
Drying capacity at 30°C, 60% RH: 39 l/24h
Drying capacity at 20°C, 60% RH: 25.8 l/24/h
Drying capacity at 10°C, 70% RH: 17.3 l/24h
Voltage supply V/Ph/Hz: 230V/1/50
Nominal power consumption at 30°C, 80% RH: 0.9 kW
Maximum power consumption: 1.2 kW
Maximum power consumption (FLA): 3.9 A
Inrush current: 19.1 A
Available pressure: 40 Pa
Humidity operating range: 40 # 99% RH
Operating temperature range: 5 # 36 °C
Sound pressure level (ISO 9614, 1 m): 47 dB (A)
Refrigerant: R410A
Refrigerant quantity: 0.47 kg
Global Warming Potential R410A: 2088 CO2e
Total CO2 equivalent: 0.98 t
Electronics compliant with CEE 73/23; CEE 89/336
Dimensions H x W x D: 750 x 835 x 260 mm