5113, Type DN100, AT100SR Warex United States Sales
If you are looking for a reliable supplier where you can purchase the 5113, Type DN100, AT100SR valve, you are in the right place. ONRION sells all product groups belonging to the Warex brand in the United States market, with fast delivery times and competitive prices.
Request a price
Delivery time:
Determined at the time of quotation
VISA
Mastercard
Bank Transfer
Technical Specification
DN 100
face to face: 39 mm
AT100SR
fitted with pneum. actuator, type
AT 100.SC-5,5, single acting/spring close
air supply necessary: 5,0 bar
with mounted with 3/2-solenoid-valve
make Herion, type 9710515.2052
monostabil, inc. manual override
with cable connection, Make Stahl, type 8163/2-20S-CWe-M20
cat. II 2 G/D, EEx ia IIC T5/T6 namur
fitted with 2 slotted proximity sensors,
make. P+F, type. SSJ 3,5-N
nominal voltage: 8V, opener
protection II 1D/2G EEx ia IIC T6 - IP67, (Initiator)
mounte in ALU- housing and wired on terminal block
acc. 51_0410_9401_02
for indicate " open - close "
E-connection: 2 x M 20 with cable screw of brass
make Stahl, type CMP-20S/16-CWe
- for medium : bulk / air
chemical not aggressive, not sticky
working pressure : 3,0 bar
max. allowable working pressure : 3,5 bar (Ps) MAWP
(Note: MAWP = design pressure)
max. allowable working temperature: 0° C to +90° C (Ts) MAWT
ambient temp.: 0° C to +50° C (Ta)
Ex-protection : inside not required /
outside according to MSR Technic cat. II 3 G
Rating of butterfly-valves according PED/2014/68/EU, diagram 7
Certified module A2
The butterfly-valves are not subject to this conformity assessment
Warex-butterfly valve, type: DKZ 110
for mounting between flanges,
drilled in ANSI 150 lbs
body of silumin with grounded connection
sealing element of NBR white
replaceable
disc of stainless steel 1.4408 for DN 50...350, otherwise 1.4301
shaft of stainless steel 1.4542 or equivalent
shaft sealing with O-rings
bearing bush of brass
test pressure: design pressure x 1,1 bar for tightness