Skip to main content
AHF 75 A 690V Three-wire active filter

AHF 75 A 690V Schaffner United States Sales

If you are looking for a reliable supplier where you can purchase the AHF 75 A 690V Three-wire active filter, you are in the right place. ONRION sells all product groups belonging to the Schaffner brand in the United States market, with fast delivery times and competitive prices.

AHF 75 A 690V Three-wire active filter
ProductAHF 75 A 690V
BrandSchaffner
SupplierONRION LLC
CountryUnited States
Request a price
Delivery time: Determined at the time of quotation
VISA Mastercard Bank Transfer

Technical Specification

Power supply voltage: 483V ÷ 793V

Supply frequency: 45Hz ÷ 62Hz

Maximum harmonic current that can be compensated:         - 60A per phase

This device is also capable of:

-        Balancing currents across the three phases

-        Compensating harmonics up to the 49th order

-        Compensating reactive power

- 4.3” LCD display for measurement visualization and settings

Cabinet dimensions: 500x250 h.675mm

Approximate weight: 70 kg

Installation type: indoor wall-mounted

External protection grade: IP20

Code 778-6044L/HL



Technical data

Series

Active Filters AHF

Power supply voltage:

483V ÷ 793V

Supply frequency:

45Hz ÷ 62Hz

Residual harmonic distortion rate THDI

< 5%

Total demand distortion TDD

According to IEEE-519, table 10-3

Harmonic compensation capacity

Up to and including the 49th

Response time

< 50 μs

Switching frequency

20kHz

External protection grade

IP20

 

 

Cooling

Forced ventilation (over 151 L/s.)

 

 

Permitted overcurrent

2.5 x Nominal Current for maximum 10ms

Ambient temperature

40°C

 

 

Communication port

RS485, Modbus protocol (RTU, TCP/IP)

Type of controller

Digital

Type of current transformer to use for the ammeter signal

 

Output…./5 A, class 1 per phase

Compliance with the following standards

IEEE519; IEC 61000

MTBF at 40°C/400V

Over 100,000 hours

Parameters

Filtering percentage of each harmonic, phase current balancing, power factor and reactive power

Installation altitude

≤ 1500 m above sea level

Between 1500m and 4000m reduce the filtering current by 1% for every additional 100m