BN 15-6LT Seepex United States Sales

General remarks Pump as delivered under Kom.-Nr. 842308, but with: - 4.0kW Nord drive [SK25F-112MH / 4] Mission data Sludge as conveyed medium Flow index low viscosity Solids content 2-5% Solid size not specified Concentration not specified Density unknown, assumed 1 kg / dm³ Media temperature 10 ° C - 20 ° C pH value approx. 5-9 Continuous operation mode Operating hours 8 h / day Installation location outside, dry Installation altitude above sea level assumed up to 1000 m Ambient temperature normal (5-40 ° C) Performance data Delivery rate pressure speed 3 m3 / h 2 bar 78 min-1 min 15 m3 / h 2 bar 368 min-1 max Starting torque 100 Nm Req. Operating power pump shaft 2.4 kW Pump inlet pressure supply (up to 0.5 bar) Tolerances according to SEEPEX works standard. Materials and designs Installation type horizontal Direction of rotation left Lantern - version with cover plates Lantern - material EN-JL1040 (GG-25) Suction casing - standard version Suction housing - material EN-JL1040 (GG-25) Pressure connection - standard version Pressure connection - material EN-JL1040 (GG-25) Spigot position position 1 Suction connection DN 80 PN 16 DIN EN 1092 (DIN2501) Pressure connection DN 65 PN 16 DIN EN 1092 (DIN2501) Joint - design pin joint with sleeve, filled with grease Joint material standard Joint - sleeve material NBR - Perbunan Coupling rod - standard version Coupling rod - material 1.4404 Rotor - standard version Rotor - material 1.0503 (C45) Rotor - Ductile coating (hard chrome) Stator - standard version, with TSE, sensor sleeve in 1.4404 Stator - material NBR - Perbunan Shaft seal mechanical seal Code single-acting mechanical seal - GA Shaft diameter 45 mm Sliding / counter ring SiC SiC Elastomer FPM Spring 1.4571 Metallic parts 1.4571 Housing - material 1.4408 Housing - connection standard ISO 228 Stub shaft - standard version Stub shaft - material 1.4404 Screw connection - standard version Painting - color RAL 5013 - cobalt blue (2K) Painting - surface protection standard surface protection C2 (NDFT 95 μm) drive Type of gear motor on the frequency converter (Frequency converter must be provided by the customer to be provided) Type M1 Reduction ratio (i) 4.64 Speed 372 min-1 Norm min max Speed 372 min-1 78 min-1 368 min-1 Motor speed 1730 min-1 363 min-1 1709 min-1 Frequency 60 Hz 13 Hz 59 Hz Nominal power 4 kW Nominal speed 1730 min-1 Activation directly on the frequency converter Efficiency class IE2 Terminal box position according to manufacturer information 1 Cable entry opening according to Manufacturer information I. Voltage 265/460 V Nominal frequency 60 Hz Degree of protection IP55 Thermal class F Winding protection TF - thermistor Base plate Execution of base plate for pump in block design, Version with fastening straps Material steel, painted Type B-ST-LS Dry run protection device (TSE) Design Standard design, parts on the pump side - Sensor sleeve inserted in the stator of the pump with built-in temperature sensor - Connection head (IP55) Voltage not available Temperature coefficient NTC Sensor sleeve material 1.4404 Connection head material aluminum