CM400.4.0.0.4 Mapro United States Sales
If you are looking for a reliable supplier where you can purchase the CM400.4.0.0.4 centrifugal blower, you are in the right place. ONRION sells all product groups belonging to the Mapro brand in the United States market, with fast delivery times and competitive prices.
Technical Specification
kW22 - IE3 - Atex 3G Zone 2
centrifugal blower with 4 stages as follows:
- machine body in cast iron
- impellers in aluminum alloy
- silicone sealing compound between end plates and intermediate sections
- cast iron bearing support installed on the outside of the compression chamber (no
contact between the treated gas and the bearings)
- double lip seal with double membrane in PTFE operating on a hardened sleeve to
protect the shaft from wear due to friction of the seals
- shaft in carbon steel
- two bronze sleeves on the bearing housing to prevent damage to the shaft in case of
bearing failure
- flanged connections DN125 PN 16
• manual control valve / condensate drainage
• transmission between the blower and electric motor made via belts and pulleys with a corresponding safety and anti-spark protective cover
• asynchronous electric motor, three-phase, 2 poles, V 400/690 - 50Hz - B3 shape – IE3 - in anti-spark execution according to Atex standards with protection II3G Ex ec IIC T3 Gc - with P.T.C.
• common base for blower, transmission, and electric motor
• assembly, testing, and painting (Ral 5010 - only electric motor according to standard color of supplier) according to our standard
• Applicable European construction directives: “ATEX” 2014/34/EU (Atex compliant group for Zone 2, Cat. 3G, marking: II3G Exh IIB T3 Gc), “machinery” 2006/42/EC, “low voltage” 2014/35/EU, “electromagnetic compatibility” 2014/30/EU; 2013/952/EU (2015/2447 on request).