DRR244-13ABC-T Pixsys United States Sales
If you are looking for a reliable supplier where you can purchase the DRR244-13ABC-T DIN RAIL TRIPLE SETPOINT CONTROLLER, you are in the right place. ONRION sells all product groups belonging to the Pixsys brand in the United States market, with fast delivery times and competitive prices.
Technical Specification
Power supply 24..230V AC/DC ±15% 50/60 Hz - galvanic isolation 2,5KV
Consumption 9 Watt/VA
Operating conditions Temperature 0..45 °C, humidity 35..95 RH% (non-condensing), max 2000m a.s.l.
Material Box: polycarbonate V0. Front cover: silicone rubber
Analog inputs 1x 16bit, K,S,R,J,T,N,B (autom. comp. of cold joint -25..85°C, ±0,2% F.S. ±1 digit F.S.), PT100, PT500, PT1000, Ni100, PTC1K, NTC10K (B3435K), 0..10 V, 0/4..20mA, 0..60 mV, Potentiometers 1..150KΩ
Sampling time Programmable up to 2,1ms (frequency up to 470Hz)
Digital outputs 2 x PNP 12/24V DC - 30mA max
Auxiliary output 12/24 VDC - 30mA max for sensor supply
Relais outputs 2x 5A - 250V AC resistive loads, 1x 2A - 250V AC resistive loads
Analogue outputs 1 x 4..20mA (40000 points ± 0,2% F.S ) or 0..10VDC (40000 points ± 0,2% F.S.)
Control algorithms ON - OFF with hysteresis, P., P.I., P.I.D., P.D. time proportional
Tuning Manual or automatic
Alarm mode Absolute / Threshold, Band, High / Low deviation. Alarm with optional Manual reset. Loop Break Alarm
Double P.I.D. Heating / Cooling with dual P.I.D.
Soft-Start Rising gradient programmable as Degree / Hour or fixed output %
Open/Close logics Open / Close logic for motorized valves
Software parameter configuration Memory Card, software LABSOFTVIEW, EASY-UP codes - Programming via APP (NFC) "MyPixsys" for Android and iOS devices
Digital inputs 2 x PNP
Serial communication RS485 (1200..115200 Baud) galvanically isolated
Communication protocols Modbus RTU
USB 1 x microUSB (for programming via MyPixsysLab software)
TA input 1x T.A. 50 mA, 800 μs - 4096 points