ED401USABCRO140 Stober United States Sales
If you are looking for a reliable supplier where you can purchase the ED401USABCRO140 Synchronous servo motor, you are in the right place. ONRION sells all product groups belonging to the Stober brand in the United States market, with fast delivery times and competitive prices.
Request a price
Delivery time:
Determined at the time of quotation
VISA
Mastercard
Bank Transfer
Technical Specification
MV0000003641
Synchronous servo motor
ED401USABCRO140
Standstill current 1.61 A.
Nominal current 1.54 A.
Standstill torque 2.51 Nm
Motor torque 2.36 Nm
Engine speed 3,000 rpm
Motor power 0.74 kW
ED / EK type designation motor ED401USABCRO140
Type of cooling convection cooling IC
Output side IEC # 98 PR 95 LK 115
Shaft design Ø14x30 with feather key
Drive controller manufacturer STOBER
Encoder connector BG / type STOBER drive controller con.23
Intermediate circuit voltage 540V intermediate circuit voltage
Drive controller type / MDS 5000 connection
Connection diagram 442561
Encoder type EnDat singleturn digital
Encoder type Ind.2.1 ECI 1319
Nominal speed nN 3000 1 / min 540V (KEM = 140) ED
Connector type angle rotatable
Mating connector Without mating connector
Power connection plug connector 8-pin con.23
Connector position 270 °
Cable entry left *
Thermal winding protection PTC in the power connection
Ambient temperature -15 to + 40 ° C standard
Thermal class (VDE 0530) 155 F
Degree of protection (EN 60529) IP56 (EN 60529)
Servomotors S1 Operating mode
Painting K / 1-layer painting
Color RAL 9005 deep black
Painting options Abrasion not painted
Documentation language German
Documentation language English
We recommend that the motors and drive controllers function properly
to use coordinated cables from our company. When using unsuitable connection cables
we reserve the right to exclude warranty claims.
Attention, the plug connectors on the motor are designed in SpeedTec® as standard.
Cables with screw-type plugs can also be used for connection.
In this case the O-ring no.5050023 (con.23) / 5050040 (con.40) must be attached to the motor connector
can be retrofitted to avoid unintentional loosening of the connection (vibration).