Skip to main content
FL2S 75L3 pump

FL2S 75L3 Fristam United States Sales

If you are looking for a reliable supplier where you can purchase the FL2S 75L3 pump, you are in the right place. ONRION sells all product groups belonging to the Fristam brand in the United States market, with fast delivery times and competitive prices.

FL2S 75L3 pump
ProductFL2S 75L3
BrandFristam
HS Code84136080
CountryUnited States
Request a price
Delivery time: Determined at the time of quotation
VISA Mastercard Bank Transfer

Technical Specification

Pump with open shaft end
Pump material: 1.4404 (316L)
Displacer: 1.4404 (316L)
Shaft seal: 761 (see below)
-
Elastomers: FEP-V with FDA certificate
Connection type: DIN 32676 clamp for pipes according to DIN 11866 C
top: 2''
bottom: 2''
Drive: without
Delivery data:
Product: Emulsion CIP
Pumping rate = 1.2-1.8 / 1.8 m³/h
Temperature = 25 / 90 °C --- Differential pressure = 8 / 8 bar
Viscosity = 1-500 mPa*s
confirmed.
- QH characteristic curve at operating point (FU) 1 operating point
- Acceptance certificate 3.1 according to DIN EN 10204
- FDA certificate / EC1935/2004
- Surface measurement protocol
- Standard specification sheet
General:
- Pump in vertical design
- Drive shaft on the left - as seen from the front on the pump cover
- Coating gray aluminum
- Product-contact surfaces for -->
Housing, cover, displacer and displacer attachment <= Ra0.4μm
Pump head:
- Cover with overflow valve and handwheel
Shaft seal:
- GLRD: double acting
Flush water pressure max. 0.2 bar
including flush water connection with pipe
other agreements:
GLRD 761 (2F21M5-X/2F1V2)
Similar to SN 0688720003, but with open shaft end