FP 1252/230 VB Fristam United States Sales
If you are looking for a reliable supplier where you can purchase the FP 1252/230 VB centrifugal pump, you are in the right place. ONRION sells all product groups belonging to the Fristam brand in the United States market, with fast delivery times and competitive prices.
Technical Specification
pump with motor base
Pump material: 1.4404 (316L)
Shaft sealing: 9.775S/2 (2V21E3/2N5E3)
1. SIC/SIC/EPDM
2. carbon/cast chrome/EPDM
Elastomers: EPDM alcohol resistant with FDA certification
Connection type: DIN 11864-NF-A for pipes according to DIN 11866 A
Suction side: DN 150
Pressure side: DN 125
Wheel diameter: 230mm
Engine: 75.0 kW, n = 2900 rpm
50 Hz, ISO class: F
Voltage 400/690V
IP 55
Funding dates:
Product = fruit juice
200-300 m³/h versus 55 m Fls
Temperature = 55°C
Viscosity = 6 mPa*s --- Density = 1.1 kg/l
More details:
Sugar max. 24 Brix, particles approx. 0.5 mm pieces of fruit, pulp content max.
40%
Very small additives such as bentonite and charcoal are possible, then with
Expect wear cleaning media: steam water max. 55°C, duration
approx. 2 h,
Sodium hydroxide solution max. 3%, pH up to 12 Free chlorine up to 500 ppm at pH 10-11
Certificates/Exams:
Documentation exclusively in accordance with Fristam standards, unless otherwise
confirmed.
- QH characteristic 1 operating point
- FDA certification/EC1935/2004
- standard dimension sheet
In general:
- RAL 9007 grey aluminum standard paint
- Note: Since August 2025, centrifugal pumps have been standard in RAL
9007 (aluminum gray) coated. A paint job with the old paint
(Hammerschlag) is possible at an additional cost.
engine:
- IEC280S motor size
- Terminal box location: right
- with cold conductor temperature sensor
- according to efficiency class IE4
pump head:
- Connections: DIN 11864-NF-A groove flange for pipes according to DIN 11866 A
Shaft sealing:
- GLRD: double-acting
Rinsing water pressure max. 0.2 bar
incl. flush water connection with G1/8" pipe