LAC2-18-9 ElectroCraft United States Sales

Voltage specified
(by Customer)
220-240/1/50-60

I. Process Requirements LAC ovens are not to be used with flammable volatiles, solvents, combustible materials, or enclosed containers. If your process involves these, consult the factory. II. Specifications 1. Work chamber (W x D x H): 36 x 24 x 36" (90 x 61 x 91 cm). Shelf supports restrict overall clear width to 34.5” (87 cm). 2. Capacity: 18.0 cubic foot (510 liters). 3. Overall external dimensions (W x D x H): 47 x 33 x 55" (120 x 84 x 139 cm). 4. Heater with fast response open coils. 1. Power Rating: 1. 4.8 kW on 240/1/50-60 power. 2. 4.0 kW on 220/1/50-60 power. 5. Operating range: 40°C to 260°C (104°F to 500°F). 1. Minimum temperature achieved with 20°C air at fresh air inlet and damper fully open. 2. Temperature displays in degrees Centigrade on all standard equipment. Fahrenheit display available on special request. 6. Recirculating motor: 1/2 HP (Qty. 2 – ¼ HP); airflow capacity: 600 CFM (282 LPS). 7. Horizontal airflow for maximum temperature uniformity: 1. Uniformity Ratings: 1. +/- 1°C at 100°C. 2. +/- 2°C at 200°C. 3. +/- 3°C at 260°C. 2. Uniformity specifications are based on a nine-point survey conducted in an empty oven after stabilization. Uniformity can vary slightly depending on unit and operating conditions. 8. Standard Power utilities: 1. Available Voltages: 1. 220-240 Volts, 1-phase, 50/60 Hertz: Maximum amp draw: 240V: 24.2A. 2. Available Voltages for Additional Cost 1. 208/1-phase full 4.8 kW power option available. 3. The Short Circuit Current Rating (SCCR) for this equipment is 5kA. The main electrical connection on this equipment is not compatible with a Residual Current Circuit Breaker (RCCB). If either of these options require higher ratings to comply with facility requirements, contact Despatch Engineering for feasibility and pricing information. 9. Gravity exhaust is adjustable to 40 CFM (18.9 LPS) with Qty. 2 - 2.5” (6.4 cm) exhaust ports by modulating the fresh air intake damper. 10. Single set-point digital controller with LED display, Future Design FDC-9100 Controller, with L91 High Limit control. 11. Solid state relays for proportioning temperature control. 12. Top mounted, vented control panel and electrical cabinet for easy access and serviceability. Placing this oven in an environment detrimental to electrical components (i.e. carbon fibers, coal dust, etc.) may results in component failure. Please contact Despatch for options available to prevent failures. 13. Type 304 stainless steel interior for maximum corrosion resistance and long service life. 14. Perforated panels cover the supply and return ducts to allow for uniform airflow in all parts of the work chamber, even with varying load configurations. 15. Chamber designed with 3 to 4 inches (7.6 to 10.1 cm) of high-grade insulation to minimize heat loss, external body temperature, and air leakage. 16. Oven is UL and C-UL listed for base model and all Configure-to-Order (CTO) or Standard Options. CE Compliance is also available. 17. No cord or plug. Electrical source needs to be hardwired. 18. Two shelves adjustable on 2" (5 cm) centers. 1. Shelf dimensions (W x D) are: 35.3 x 23.75" (89.7 x 60.3 cm). 2. Maximum 50 lbs. (23 kg) per shelf. 3. overall load capacity of 300 lbs. (136 kg). 4. The maximum number of shelves this oven can accommodate is seventeen (17). 19. Oven weight is approximately 450 lbs. (204 kg). Oven shipping weight is approximately 585 lbs. (265 kg) or approximately 640 lbs. (290 kg) with the Fastened Stand option. 20. Detailed electronic instruction manual. https://www.despatch.com/manuals.html 21. Units must pass an inspection and Factory Acceptance Test (FAT) prior to shipping. Test procedures can be provided upon request.