MRA100 (200 μm Filter) Grünbeck United States Sales
If you are looking for a reliable supplier where you can purchase the MRA100 (200 μm Filter) Backwash filter, you are in the right place. ONRION sells all product groups belonging to the Grünbeck brand in the United States market, with fast delivery times and competitive prices.
Technical Specification
According to DIN EN 806-2, a filter according to DIN EN 13443-1, 19628, must be installed in the drinking water system immediately after the water meter installation for metal pipes. A filter should also be installed for plastic pipes.
- DVGW certified -
Fully automatic backwash filter with modular filter element made of plastic with filter mesh made of stainless steel including
rotating nozzle and scraping brushes for
mechanical additional cleaning for optimal
backwash effect, equipped drive unit.
Water extraction is also
possible during backwashing.
Housing made of dezincification-resistant brass,
easily opened for maintenance checks,
including 2 pressure gauges,
flush water connection with free outlet
according to DIN EN 1717 for DN 50.
The integrated bus interface, fault detection, and a potential-free contact allow for easy
remote monitoring and control, so
you are always informed about the current system status
of the automatic filter.
All water-contacting parts comply with
the drinking water regulation.
Technical data:
Connection: 100 DN
Nominal flow rate: 60.0 m³/h
Initial pressure loss: 0.2 bar
Kv value: 138.0 m³/h
Passage width: 200 μm
Nominal pressure (PN): 16 bar
Operating pressure: 2-16 bar
Water temperature: 5-90 degrees C
Installation length with flange connection (without GSD): 250 mm
Construction height: 691 mm
Required
Channel connection: 50 DN
Power connection
(Schuko plug): 230 V, 50 Hz
Protection class: 54 IP
Operating voltage: 24 V
Manufacturer: Grünbeck