PT 113 XR Procon United States Sales
If you are looking for a reliable supplier where you can purchase the PT 113 XR industrial product, you are in the right place. ONRION sells all product groups belonging to the Procon brand in the United States market, with fast delivery times and competitive prices.
Technical Specification
Drum motor type PT 113 XR - Series alpha (see note below)
with a built-in backstop
Pipe diameter D1 Ø 113 mm, conical-cylindrical, pipe made of stainless steel
Length TL 260 mm
Clamping length EL 270 mm
Total shaft length AGL 320 mm
Shaft dimensions D/SW x L Ø 30/20 x 25 mm, shaft made of stainless steel
Shaft pin on one side with an offset threaded hole
M10. Distance from the center of the hole to the end of the shaft 15 mm
Speed v 0.05 m/s
Power P 65 watts
Belt tension 1300 N - Drum torque 73.5 Nm
Voltage U Star: 360-440 V/50 Hz - 380-460 V/60 Hz
Delta: 200-250 V/50 Hz - 220-270 V/60 Hz
Winding with thermal contact 150 °C
Operating mode S1
Polarity p 8
Insulation class F
Protection class IP 66, cover made of stainless steel
External sealing parts made of NBR material
Electrical connection type 4, junction box, material plastic, white, PE1000
The drum motor can be operated with mains voltage 3 x 400 V/50 Hz
or with a frequency converter with input 1 x 230/50 Hz
Lubricant fully synthetic high-performance grease (maintenance-free) - Lubricant according to USDA-H1 standard (food grease)
Additional The backstop allows the drive to only rotate in
one direction to prevent the return of the belt and the goods on it
in case of an unexpected power failure or when the motor is turned off. The backstop is installed so that the drum motor, from the perspective of the connection side, rotates to the left and
LOCKS TO THE RIGHT. You can specify the direction of rotation when placing the order. The special notes for the
electrical connection must be observed.