PV 6211-K DN50 RTK Regeltechnik United States Sales
If you are looking for a reliable supplier where you can purchase the PV 6211-K DN50 industrial product, you are in the right place. ONRION sells all product groups belonging to the RTK Regeltechnik brand in the United States market, with fast delivery times and competitive prices.
Technical Specification
Pneumatic control valve - PV 6211-K series
straight-through design
Nominal diameter DN 50, nominal pressure PN 40
Housing material: cast steel EN-GP-240-GH
Flanges according to DIN, machined to ANSI 300 lbs. RF
Spindle seal:
Extended chloroprene roof collar set
Characteristic curve/inflow: equal percentage/under the cone
Parabolic cone, soft sealing
Kvs value = 37 m³/h, stroke 30 mm
Seat diameter 50 mm
Spindle heating: Heating cartridge 2 x 10 W, 110 V, 50/60 Hz
Synthetic resin coating RAL 7023 (concrete grey)
with certificate according to EN 10204-3.1B
CE marking according to Pressure Equipment Directive (PED)
Max. permissible pressure according to DIN EN 1092
Max. permissible temperature TS 100 °C
Valve according to DIN EN 12 284
Leakage test according to DIN EN 12 266-1
Pneumatic actuator - type ST 6135.B6-6G
Max. supply air pressure 6 bar g
Diaphragm area 280 cm²
Spring range 0.8 to 3.0 bar / max. stroke 35 mm
Safety position: Spring closes
(Dividing valve: Gate A, Mixing valve: Gate B)
Additional equipment:
- Electropneumatic positioner, type SR 6136 Ex (SIPART PS2)
Ex protection II 2 G EEx ia/ib IIC T6, TÜV 00 ATEX 1654, 2-wire
Input 4 to 20 mA
at 0% input, valve closed