Typ BN 2-6L Seepex United States Sales
If you are looking for a reliable supplier where you can purchase the Typ BN 2-6L Pump for pumping polyelectrolyte solution, you are in the right place. ONRION sells all product groups belonging to the Seepex brand in the United States market, with fast delivery times and competitive prices.
Technical Specification
Deployment data
Polyelectrolyte solution pumped medium
Low viscosity flow index
Viscosity 31-40 mPas
Solid content without
Solid size not relevant
Concentration ≤ 1%
Density unknown, 1 kg/dm³ assumed
Media temperature 5°C - 30°C
Medium temperature (normal) 30°C
pH value assumed to be neutral
Continuous mode
Operating hours 8-12 h/day
Installation location closed building, dry
Installation height above sea level up to 1000 m assumed
Normal ambient temperature (5-40 °C)
performance data
flow rate pressure speed
0.7 m3/h 2 bar 107 min-1 min
1.47 m3/h 2 bar 218 min-1 norm
2.2 m3/h 2 bar 324 min-1 max
Starting torque 35 Nm
Erf. Pump shaft operating power 0.48 kW
Inlet pump pressure (up to 0.5 bar)
Tolerances in accordance with SEEPEX factory standards.
Materials and designs
Installation type horizontal
Direction of rotation left
Lantern - version with cover plates
Lantern - EN-JL1040 (GG-25) material
Suction housing - standard version
Suction housing - material EN-JL1040 (GG-25)
Pressure connector - standard version
Pressure connector - material EN-JL1040 (GG-25)
Nozzle position 1
Suction connection DN 50 PN 16, DIN EN 1092-2, type B
Pressure connection DN 40 PN 16, DIN EN 1092-2, form B
Joint - Bolt joint design with cuff, grease-filled
Joint - standard material, straps 1.4401
Joint - NBR collar material - Perbunan
Coupling rod - standard version
Coupling rod - material 1.4404
Rotor - standard version
Rotor - material 1.4404
Stator - standard version, with TSE, sensor sleeve in 1.4404
Stator - material NBR - Perbunan
Shaft seal Mechanical seal
Code single-acting GLRD - GA
shaft diameter 38 mm
Slide/counter ring SiC SiC
Elastomer FPM
Spring 1.4571
Metallic parts 1.4571
Housing - material PPS 40% glass-reinforced
Housing - ISO 228 connection standard
Socket shaft - standard version
Socket shaft - material 1.4404
Screw connection - standard version
Painting - color RAL 5013 - cobalt blue (2K)
Painting - surface protection St. surface protection C2 (NDFT 95 μm)
propulsion
Type of gear motor on the frequency converter
(The frequency converter must be provided by the customer
be provided)
Flange design
Installation position M1
Reduction (i) 6.58
Speed 215 min-1
Norm Min Max
Speed 215 min-1 107 min-1 324 min-1
Engine speed 1410 min-1 703 min-1 2133 min-1
Frequency 50 Hz 25 Hz 75 Hz
Rated power 0.75 kW
Rated speed 1410 min-1
Switch on directly at the frequency converter
Efficiency class IE3
Terminal box position in accordance with manufacturer information 1
Cable entry opening in accordance with
Manufacturer information
I
Voltage 230/400 V
Rated frequency 50 Hz
Protection class IP55
Warmth class F
TF - Thermistor Winding Protection
The frequency converter must have a linear U/f characteristic (constant torque).
A device is required that has at least an overload capacity of 150% for at least 60s
has. (see technical data of the device)
baseplate
Base plate design for pump in block design
Material steel, painted
Type B-ST
Dry run protection device (TSE)
Stator version in TSE version
- sensor sleeve inserted in the pump stator
Voltage not available
Temperature coefficient without
Sensor sleeve material 1.4404
Connection head material without