Type 488 (4884.8844) Leser United States Sales
If you are looking for a reliable supplier where you can purchase the Type 488 (4884.8844) Clean service safety valve, you are in the right place. ONRION sells all product groups belonging to the Leser brand in the United States market, with fast delivery times and competitive prices.
Request a price
Delivery time:
Determined at the time of quotation
VISA
Mastercard
Bank Transfer
Technical Specification
HyTight, for great performance,
closed spring cap, gas-tight air vent H4,
for vapors, gases and liquids
Technical Specification:
Order code output, line 1: H03N04J79X00I80A81I75I76H02B70
Order code output, line 2: J22H01L23H66A84
Housing material: (H02)
1.4404/316L
Nominal inlet NPS 1 1/2"
Nominal outlet NPS 2"
Pressure inlet PN 16
pressure stage outlet PN 16
d0 (ASME-DIN) [mm] 23,0
Flow rate D/G: 0.70
Flow rate F: 0.45
Connection inlet (I75)
BO - Clamp connection/ASME BPE
Connection outlet (I76)
BO - Clamp connection/ASME BPE
Pipe Standard Inlet (H66)
ASME BPE & DIN 11866 Series C
Pipe Standard Outlet (A84)
ASME BPE & DIN 11866 Series C
Clamp size inlet/inner Ø 34.8 mm
Clamp size inlet /outside Ø 50.5 mm
Clamp size leakage, inner diameter 47.5 mm
Clamp size leakage, outer Ø 64,0 mm
Response pressure: 3.90
Printing unit: bar-g
Response pressure [bar-g] 3.90
Response pressure in psi-g: 56.56
cold adjustment pressure [bar-g] 3.90
cold setting pressure [psi-g] 56,56
Operating temperature: 20
Temperature unit: °C - Celsius
Operating temperature [°C] 20.00
Operating temperature in °F: 68
READER Surface package: (B70)
Sterile finish
Medium Wetted Surface:
Admission: electropolished Ra <= 0.375μm
Bottom of the plate: electropolished Ra <= 0.375μm
Exfoliation room surface:
Inner surface: electropolished Ra <= 0.75μm
Weld: electropolished Ra <= 3μm
External surface: electropolished Ra <= 1.5μm
Plate, soft sealing: (J22)
with soft seal EPDM “D”
Bellows: (J79)
Bellows made of elastomer EPDM, spring cap with open control hole
Material quality certificate for: (H01)
Enclosure — Position 1 with material quality certification 3.1 according to DIN EN 10204
Material quality certificate for: (L23)
Plate - position 7 with material quality certificate 3.1 according to DIN EN 10204
Documentation: (H03)
LESER CGA Certificate for Global Application Acceptance Test Certificate 3.1 according to DIN
EN 10204
Documentation: (N04)
Test report special surfaces center roughing value Ra
Tag-no., Valve 1: PSV-371
Type and location of day no.: (M25)
Labelling with tag (foil/paper)
2.Marking, item (1): 4988A-D4BO11/2RA04
Type and position of the 2nd license: (M25)
Labelling with tag (foil/paper)