Type DKZ 110 APS DN 150 Warex United States Sales

Butterfly valve, Overall length 56 mm for clamping between flanges according to EN 1092, PN 10 Silumin housing Flap disc made of stainless steel 1.4408 - with increased gap size - Shafts made of stainless steel 1.4057 or higher Shaft sealing with O-rings shaft bearing Sealing sleeve made of gray silicone exchangeable in the housing pneumatically tensionable against the valve disc < APS > The valve has the following special equipment: with mounted shaft extension, steel, Height 150mm for heat dissipation + flat gasket made of Isoplan 750; 2mm thick Execution according to drawing: 1024994Mb further attachments: Pneumatic rotary drive AT 60 DR double-acting required control pressure 6.0 bar el./pneumatic Control for APS flaps Type: DKZ110 / 103 *** PLC required *** (Attention! Solenoid valves must be equipped with 2 separate controlled by signals from a PLC! ) for opening and closing butterfly valves Series: DKZ 110 / 103 < APS > consisting of: 1 piece mounting plate for Namur valve 1 ball valve MS, 1/4" internal thread with hand lever 1 pressure reducer, make Knocks 0.1-3 bar, type RE01G including manometer (1006270) incl. retaining plate and screw connections Execution according to tax plan no. 0004324 - Ventilation of the sealing sleeve using the on-site vacuum system - Piping of the line from the valve to the sealing collar in stainless steel (screw connections checked for leaks) - including checking the seal for pressure loss Solenoid valve 5/2 way function Norgren 2623077.3036 24 V DC, 1.6 W, IP 65, Namur version - without plug - Solenoid valve 5/2 way function Norgren 2623077.3036 24 V DC, 1.6 W, IP 65, Namur version - without plug - Limit switch box with double sensor P+F NBN3-F25F-E8-V1 3-wire type, PNP normally open, 10-30 V DC installed in Vestamid/PRB round housing Diameter 80 x 50 with V1 device connector M12x1, 4-pole, ---- without angled socket ---