UFC24-230 Joventa United States Sales

Controls and monitors up to 2 motorized fire or smoke extraction dampers that function in parallel and 1 smoke detector. Electrical Data: Rated voltage: 24 V AC / DC; Functional range: -20%... + 20%; Dimensioning: 2 VA + damper actuator (max. 24VA); Power consumption: 2 W + damper actuator; Rated motor voltage: 110 - 230V AC; Connections: AMP plug connections and terminal connections. Communication / Modbus: Protocol: Modbus RTU; Medium: RS-485, not galvanically isolated; Transmission formats: Specified by Modbus RTU standards; Number of nodes: 100 (without repeater); Baud rates: 9'600, 19'200, 38'400, 76'800 bps; Addresses: 1..127 (1-10 reserved for FSC-M200) (0 reserved for transmission); Reaction time: <200 ms. Communication / BACnet: Protocol: BACnet MS/TP; Medium: RS-485, not galvanically isolated; Number of nodes: 65 (without repeater); Baud rates: 9'600, 19'200, 38'400, 76'800 (automatic detection); Reaction time: <100 ms; BACnet Instance Number: Automatically generated (physical address writable); Termination: 120 Ohm terminating resistor bridge on print available. Position of the bridge if the FSC-UFC24 is the last device in the string. Safety: Protection class: III (low voltage); Degree of protection: IP42, Housing made of non-flammable polycarbonate; EMC: 2014/35/EU; Low Voltage Directive: 2014/30/EU; Mode of operation: Type 1 (EN 60730-1); Rated impulse voltage: 2.5 kV (EN 60730-1); Pollution degree of environment: 3 (EN 60730-1); Ambient temperature: -20 … + 50 °C; Storage temperature: -20 … + 80 °C; Humidity test: 95% r.H., non-condensing (EN 60730-1); Maintenance: Maintenance-free. Mechanical Data: Width: 120 mm; Length: 153 mm; Height: 57 mm (with console); Weight: approx. 415 g (with console). Installation: The FSC-UFC24 is usually mounted directly on or near the fire or smoke extraction damper. The console can be pre-installed. The FSC-UFC24 can be easily snapped onto the console at any time during the project.