UG8-ED-24 Calectro United States Sales
If you are looking for a reliable supplier where you can purchase the UG8-ED-24 smoke detector, you are in the right place. ONRION sells all product groups belonging to the Calectro brand in the United States market, with fast delivery times and competitive prices.
Technical Specification
Calectro duct smoke detector with display/Modbus 24 V AC/DC
The Uniguard UG8 smoke detector was developed to detect smoke in ventilation ducts and
combines a smoke detector with an adapter system, with pipe and housing specifically designed for optimal
Airflow through the smoke detector was constructed. The UG8 can be mounted on either side of the channel
become. It comes with a rotating part, which, together with the selected Venturi tube, is attached to the
ventilation line is installed. The patent-pending detector housing with cable entries and
Reset button can be rotated in any direction to adapt to the conditions of the installation site
adjust.
The UG8-ED-24 has a display that shows the degree of contamination of the detector as a percentage.
When the detector triggers a service/contamination alarm, “SA” appears on the display instead of a
percentage.
Other ads:
“AL” = smoke alarm
“LF” = low airflow alarm
“--” = system failure/detector removed
power supply: 24 V AC/DC ± 10%
Detector type: Optical EVC-PR-DA, EN54-7
Max. power consumption: 100 mA
Modbus communication: RS485
Operating temperature: -20°C to +55°C
Maximum humidity: 95% RH
Air velocity range: 1 to 20 m/s
Approvals: CE, EN 54-27, VDS G224038
Relay output: potential-free
Smoke alarm relay: 2, 250 V, 8A
Service and air speed alarm: 1 250 V, 1 A
System fault alarm: 1, 250 V, 1 A
LED on smoke detector:
Green: service alarm (contamination)
red - smoke alarm
LED on board:
Green: normal mode
Flashing yellow - system error
Yellow - air speed alert
Adapter housing: PC/ABS
Protection class: IP65
including standard Venturi tube PST192