VXIO-322-HOA Alerton United States Sales
If you are looking for a reliable supplier where you can purchase the VXIO-322-HOA industrial product, you are in the right place. ONRION sells all product groups belonging to the Alerton brand in the United States market, with fast delivery times and competitive prices.
Request a price
Delivery time:
Determined at the time of quotation
VISA
Mastercard
Bank Transfer
Technical Specification
POWER - 20 to 30 VAC @ 50-60 Hz. VXIO-965-HOA:
35 VA minimum / VXIO-322-HOA:15 VA minimum.
(maximum 100 VA across all BO loads). Half-wave
rectified.
03 INPUTS - 16-bit universal inputs accept 10k
thermistor (type II and III), dry contact, 1k platinum RTD,
0-20 mA, 0-10 V, or dry-contact pulse. Pulse input
maximum frequency of 100 Hz. Pulse input minimum
duty cycle 5ms ON / 5ms OFF.
POWER OUTPUT FOR EXTERNAL SENSORS - 20
VDC ±10% @ 250 mA maximum for VXIO-965-HOA
and 100 mA maximum for VXIO-322-HOA.
02 BINARY OUTPUTS - Solid-state relay rated 20-30
VAC @ 50/60 Hz, 1.5 amps continuous, 3.5 amp inrush
for 100ms. Hand-Off-Auto (H-O-A) switches for manual
override, software controlled, monitored switch position
status. See IMPORTANT NOTE below.
02 ANALOG OUTPUTS - 16-bit universal analog
outputs support Voltage Mode: 0-10 VDC @ 10 mA
maximum (1k ohm minimum); Current Mode: 4-20 mA
@ 550 ohms Maximum; or Binary Mode: 12 VDC @
20mA maximum relay coil current (for controlling lowcoil
current 12 VDC relays and solid-state relays). Hand-
Off-Auto (H-O-A) switches with potentiometers for
manual override, software controlled, monitored switch
position and potentiometer status.
INPUT/OUTPUT TERMINATIONS - Removable
header-type screw terminals.
MAX DIMENSIONS - VXIO-965-HOA: 5.32“ (135 mm)
W x 4.33” (110 mm) H x 2.26” (57.4 mm) D. / VXIO-322-
HOA:3.35” (85 mm) W x 4.33” (110 mm) H x 2.26” (57.4
mm) D.
MOUNTING - 35mm DIN rail or screw mounting
ENVIRONMENTAL - Ambient: -20 to 55°C (-4 to 131°F)
/ Storage: -20 to 85°C (-4 to 185°F) / 5 to 95%RH noncondensing.
COMMUNICATIONS - Communications with the VIP
controller is a proprietary protocol over RS-485.
MICROCONTROLLER - 32-bit ARM Cortex M4, 120
MHz.
MEMORY - 512KB of on-chip flash and 128KB of RAM.
SECURITY - Integrated secure boot prevents loading of
tampered firmware.